🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

B.O.T.C.K - Bolt On TrackBar Correction kit Gen3 Tundra

B.O.T.C.K - Bolt On TrackBar Correction kit Gen3 Tundra

Fits: Gen 3 Toyota Tundra (5-link rear suspension)

What It Does

  • Fixes that sketchy, side-to-side axle swing after a lift.

  • Brings your track bar (panhard bar) back to a more natural, level position.

  • Keeps your rig tracking straight, planted, and predictable on-road and off.
    Bolt-on design — no welding, no guesswork.

Why It Matters

  • When you lift your rig, the track bar angle gets steep. That forces the axle to swing left/right instead of moving up/down — making the rear feel unstable.
  • The B.O.T.C.K. raises the pivot point to flatten that bar and bring your handling back to normal. Simple fix, huge difference.

Shorty vs. Regular – Pick the Right One 

How to Pick the Correct B.O.T.C.K. Version

  1. Park on level ground.

  2. Measure from the ground to the center of the frame-side track-bar bolt.

  3. Measure from the ground to the center of the axle-side track-bar bolt.

  4. Subtract the two measurements to find your bolt-height difference:

    • 1.5"–2.99" → Shorty Version (or use the bottom hole on the Standard bracket)

    • 3" or higher → Standard Version (use the top hole)

Planning to lift higher later? Go with the Standard Version — it gives you extra mounting options as your suspension height changes.

Updates You Need to Know

  • No more flange nuts – now standard hex nuts.

  • Washer for side bolt no longer needed. 

  • Torque spec: 105 ft-lbs on all bolts with lots of blue Loctite (or a little red).

  • KDSS or non-KDSS? Doesn’t matter. Works with both.

Real Talk

  • Stop buying parts you don’t need — understand what it does before hitting checkout.

  • This kit isn’t just stronger than weld-on options — it spreads load evenly across the OEM mount instead of depending on the welds.

  • Designed for rigs that actually see dirt, not just mall crawlers.

What’s Included 

  • Front bracket

  • Back bracket

  • Flag nut

  • (1x) M14 x 1.5 x 75mm flange head bolt

  • (2x) M14 x 1.5 x 35mm flange head bolt

  • (1x) M14 hex nut

  • All hardware is zinc coated

Fulfillment Time: Please allow 36–48 hours.

 

Select Colors available
From $210.00
B.O.T.C.K - Bolt On TrackBar Correction kit Gen3 Tundra—
$210.00
Product image 1
Product image 2
Product image 3
Product image 4
Product image 5
Product image 6
Product image 7
Product image 8
Product image 9
Product image 10
Product image 11
Product image 12
Product image 13
Product image 14
Product image 15
Product image 16
Product image 17
Product image 18
Product image 19
Product image 20
Product image 21
Product image 22
Product image 23
Product image 24
Product image 25
Product image 26

Description

Fits: Gen 3 Toyota Tundra (5-link rear suspension)

What It Does

  • Fixes that sketchy, side-to-side axle swing after a lift.

  • Brings your track bar (panhard bar) back to a more natural, level position.

  • Keeps your rig tracking straight, planted, and predictable on-road and off.
    Bolt-on design — no welding, no guesswork.

Why It Matters

  • When you lift your rig, the track bar angle gets steep. That forces the axle to swing left/right instead of moving up/down — making the rear feel unstable.
  • The B.O.T.C.K. raises the pivot point to flatten that bar and bring your handling back to normal. Simple fix, huge difference.

Shorty vs. Regular – Pick the Right One 

How to Pick the Correct B.O.T.C.K. Version

  1. Park on level ground.

  2. Measure from the ground to the center of the frame-side track-bar bolt.

  3. Measure from the ground to the center of the axle-side track-bar bolt.

  4. Subtract the two measurements to find your bolt-height difference:

    • 1.5"–2.99" → Shorty Version (or use the bottom hole on the Standard bracket)

    • 3" or higher → Standard Version (use the top hole)

Planning to lift higher later? Go with the Standard Version — it gives you extra mounting options as your suspension height changes.

Updates You Need to Know

  • No more flange nuts – now standard hex nuts.

  • Washer for side bolt no longer needed. 

  • Torque spec: 105 ft-lbs on all bolts with lots of blue Loctite (or a little red).

  • KDSS or non-KDSS? Doesn’t matter. Works with both.

Real Talk

  • Stop buying parts you don’t need — understand what it does before hitting checkout.

  • This kit isn’t just stronger than weld-on options — it spreads load evenly across the OEM mount instead of depending on the welds.

  • Designed for rigs that actually see dirt, not just mall crawlers.

What’s Included 

  • Front bracket

  • Back bracket

  • Flag nut

  • (1x) M14 x 1.5 x 75mm flange head bolt

  • (2x) M14 x 1.5 x 35mm flange head bolt

  • (1x) M14 hex nut

  • All hardware is zinc coated

Fulfillment Time: Please allow 36–48 hours.

Â